View 15ETX06PBF_710233.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Bulletin PD-20885 rev. A 10/06
15ETX06PBF 15ETX06FPPbF
Hyperfast Rectifier
Features
* * * * * * Benchmark Ultra-low Forward Voltage Drop Hyperfast Recovery Time Low Leakage Current 175C Operating Junction Temperature Fully Isolated package (VINS = 2500 VRMS) Lead-Free ("PbF" suffix)
trr = 18 ns IF(AV) = 15Amp VR = 600V
Description/ Applications
State of the art Hyperfast recovery rectifiers designed with optimized performance of forward voltage drop, Hyperfast recover time, and soft recovery. The planar structure and the platinum doped life time control guarantee the best overall performance, ruggedness and reliability characteristics. These devices are intended for use in PFC Boost stage in the AC-DC section of SMPS, inverters or as freewheeling diodes. The IR extremely optimized stored charge and low recovery current minimize the switching losses and reduce over dissipation in the switching element and snubbers.
Absolute Maximum Ratings Parameters
VRRM IF(AV) IFSM IFM Peak Repetitive Reverse Voltage 600 Average Rectified Forward Current @ TC = 133C @ TC = 62C (FULLPACK) Non Repetitive Peak Surge Current @ TJ = 25C Peak Repetitive Forward Current 170 30 - 65 to 175 C
Max
V 15
Units
A
TJ, TSTG Operating Junction and Storage Temperatures
Case Styles
15ETX06
15ETX06FP
Base Cathode
2
1
1 3
3
Cathode
Anode
Cathode
Anode
TO-220AC www.irf.com
TO-220 FULLPACK 1
15ETX06PBF, 15ETX06FPPbF
Bulletin PD-20885 rev. A 10/06
Electrical Characteristics @ TJ = 25C (unless otherwise specified)
Parameters
VBR, Vr VF Breakdown Voltage, Blocking Voltage Forward Voltage
Min Typ Max Units Test Conditions
600 2.3 1.5 0.1 40 20 8.0 3.2 1.8 50 300 V V V A A pF nH IR = 100A IF = 15A, TJ = 25C IF = 15A, TJ = 150C VR = VR Rated TJ = 150C, VR = VR Rated VR = 600V Measured lead to lead 5mm from package body
IR
Reverse Leakage Current
-
CT LS
Junction Capacitance Series Inductance
-
Dynamic Recovery Characteristics @ TC = 25C (unless otherwise specified)
Parameters
trr Reverse Recovery Time
Min Typ Max Units Test Conditions
18 20 22 52 2.4 5.1 25 150 37 16 350 22 32 ns A nC nC A ns IF = 1A, diF/dt = 100A/s, VR = 30V IF = 15A, diF/dt = 100A/s, VR = 30V TJ = 25C TJ = 125C TJ = 25C TJ = 125C TJ = 25C TJ = 125C TJ = 125C TJ = 125C TJ = 125C IF = 15A diF /dt = 800A/s VR = 390V IF = 15A diF /dt = 200A/s VR = 390V
IRRM Qrr trr IRRM Qrr
Peak Recovery Current Reverse Recovery Charge Reverse Recovery Time Peak Recovery Current Reverse Recovery Charge
-
Thermal - Mechanical Characteristics
Parameters
TJ TStg RthJC RthJA RthCS Max. Junction Temperature Range Max. Storage Temperature Range Thermal Resistance, Junction to Case Thermal Resistance, Junction to Ambient Thermal Resistance, Case to Heatsink Weight Mounting Torque Per Leg Per Leg Fullpack (Per Leg)
Min
- 65 6.0 5.0
Typ
1.0 3.0 0.5 2.0 0.07 -
Max
175 175 1.3 3.5 70 12 10
Units
C C/W
g (oz) Kg-cm lbf.in
Typical Socket Mount Mounting Surface, Flat, Smooth and Greased
2
www.irf.com
15ETX06PBF, 15ETX06FPPbF
Bulletin PD-20885 rev. A 10/06
100
Reverse Current - I R (A)
1000
T J = 175C
100 10 1 0.1 0.01
150C 125C 100C
25C
Instantaneous Forward Current - I F (A)
0.001 0.0001 0 100 200 300 400 500 600
10
T = 175C J
Junction Capacitance - C T (pF)
Reverse Voltage - VR (V) Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage
1000
T = 25C
J
T = 150C J T = 25C J
100
10
1 0 0.5 1 1.5 2 2.5 3 3.5 4
Forward Voltage Drop - VFM (V) Fig. 1 - Typical Forward Voltage Drop Characteristics
1 0 100 200 300 400 500 600
Reverse Voltage - VR (V) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage
10
(C/W)
thJC
Thermal Impedance Z
1
D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01 Single Pulse (Thermal Resistance)
PDM
t1 t2
0.1
Notes: 1. Duty factor D = t1/ t2 2. Peak Tj = Pdm x ZthJC + Tc
0.01 0.00001
0.0001 0.001 0.01 t1, Rectangular Pulse Duration (Seconds)
0.1
1
Fig. 4 - Max. Thermal Impedance Z thJC Characteristics
www.irf.com
3
15ETX06PBF, 15ETX06FPPbF
Bulletin PD-20885 rev. A 10/06
10
(C/W)
1
Thermal Impedance Z
D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01 Single Pulse (Thermal Resistance)
Notes:
thJC
PDM
t1 t2
0.1
1. Duty factor D = t1/ t2 2. Peak Tj = Pdm x ZthJC + Tc
0.01 0.00001
0.0001
0.001
0.01
0.1
1
10
100
t1, Rectangular Pulse Duration (Seconds) Fig. 5 - Max. Thermal Impedance Z thJC Characteristics (FULLPACK)
180
Allowable Case Temperature (C)
200
Allowable Case Temperature (C)
170 160 150 140 130 Square wave (D = 0.50)
Rated Vr applied
150
DC
100
DC
50 Square wave (D = 0.50)
Rated Vr applied see note (3)
120 see note (3) 110 0 5 10 15 20 25
Average Forward Current - IF(AV) (A) Fig. 6 - Max. Allowable Case Temperature Vs. Average Forward Current
0 0 5 10 15 20 25
Average Forward Current - IF(AV) (A) Fig. 7 - Max. Allowable Case Temperature Vs. Average Forward Current (FULLPACK)
40
Average Power Loss ( Watts )
35 30 25 20 15 10 5 0 0 5
DC
RMS Limit
D = 0.01 D = 0.02 D = 0.05 D = 0.1 D = 0.2 D = 0.5
(3) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 8); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = rated VR
Average Forward Current - IF(AV) (A)
10
15
20
25
Fig. 8 - Forward Power Loss Characteristics
4
www.irf.com
15ETX06PBF, 15ETX06FPPbF
Bulletin PD-20885 rev. A 10/06
70
450 400 350
V R = 390V T J = 125C T J = 25C
50
trr ( ns )
IF = 15 A
IF = 30 A
300
Qrr ( nC )
IF = 30 A
250 200 150
IF = 15 A
30
IF = 30 A
100 50
IF = 15 A
IF = 30 A
V R = 390V T J = 125C T J = 25C
IF = 15 A
10 100
1000
0 100
1000
di F /dt (A/s ) Fig. 9 - Typical Reverse Recovery vs. di F /dt
di F /dt (A/s ) Fig. 10 - Typical Stored Charge vs. di F /dt
Reverse Recovery Circuit
VR = 200V
0.01 L = 70H D.U.T. dif/dt ADJUST
diF /dt
D G IRFP250 S
Fig. 11- Reverse Recovery Parameter Test Circuit
www.irf.com
5
15ETX06PBF, 15ETX06FPPbF
Bulletin PD-20885 rev. A 10/06
3
IF 0
t rr ta tb
4
Q rr
2
I RRM
0.5 I RRM di(rec)M/dt 0.75 I RRM
5
1
diF /dt f
4. Qrr - Area under curve defined by t rr and IRRM t rr x I RRM Q rr = 2 5. di (rec) M / dt - Peak rate of change of current during t b portion of t rr
1. diF/dt - Rate of change of current through zero crossing 2. IRRM - Peak reverse recovery current 3. trr - Reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current
Fig. 12 - Reverse Recovery Waveform and Definitions
Outline Table
Conforms to JEDEC Outline TO-220AC Dimensions in millimeters and (inches)
6
www.irf.com
15ETX06PBF, 15ETX06FPPbF
Bulletin PD-20885 rev. A 10/06
Outline Table
10.6 10.4 HOLE o 3.4 3.1 2.8 2.6
7.1 6.7
3.2
3.7
1
3
16.0
16.4
15.4
15.8
Cathode
Anode
10
3.3
3.1
13.7
2.54 TYP. 0.9 0.7 2.54 TYP. 0.48 0.44 2.85 2.65 1.15 1.4 1.3 1.05 TYP R0.7 (2 PLACES) R0.5
4.8 4.6
Conforms to JEDEC Outline TO-220 FULLPACK Dimensions in millimeters and (inches)
5 0.5 5 0.5
Part Marking Information (TO-220)
IRXC Assembly Line EXAMPLE: THIS IS A 15ETX06 LOT CODE 1789 ASSEMBLED ON WW 19, 2001 IN THE ASSEMBLY LINE "C" INTERNATIONAL RECTIFIER LOGO DATE CODE ASSEMBLY LOT CODE P = LEAD-FREE YEAR 1 = 2001 WEEK 19 LINE C PART NUMBER
IRMX Assembly Line EXAMPLE: THIS IS A 15ETX06 LOT CODE 1789 ASSEMBLED ON WW 19, 2001 IN THE ASSEMBLY LINE "C" INTERNATIONAL RECTIFIER LOGO
ASSEMBLY LOT CODE
13.5
PART NUMBER
DATE CODE YEAR 1 = 2001 WEEK 19 P = LEAD-FREE
www.irf.com
7
15ETX06PBF, 15ETX06FPPbF
Bulletin PD-20885 rev. A 10/06
Part Marking Information (TO-220 FULL-PAK)
PART NUMBER FP = Fullpack
EXAMPLE: THIS IS A 15ETX06FP LOT CODE 1789 ASSEMBLED ON WW 19, 2002 IN THE ASSEMBLY LINE "C"
INTERNATIONAL RECTIFIER LOGO ASSEMBLY LOT CODE
DATE CODE YEAR = 2002 WEEK 19 P = Lead-Free
Ordering Information Table
Device Code
15
1 1 2 3 4 5 6 7 -
E
2
T
3
X
4
06
5
FP
6
PbF
7
Current Rating (15 = 15A) E T X = Single Diode = TO-220, D2Pak = HyperFast Recovery none = TO-220AC FP = TO-220 FULLPACK none = Standard Production PbF = Lead-Free
Voltage Rating (06 = 600V)
Tube Standard Pack Quantity: 50 pieces
Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level and Lead-Free. Qualification Standards can be found on IR's Web site.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 10/06
8
www.irf.com

▲Up To Search▲

Price & Availability of 15ETX06PBF

	To Download 15ETX06PBF Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .